This used Shure FP33 3-Channel Field Mixer comes with a power adapter.
Condition: This mixer is in good condition with normal marks and wear from use, has been fully tested, and works exactly as it should. Please see pictures for details on item condition - only what is pictured is included.
Product Details: The FP33 is a 3-input, 2 output, portable stereo mixer specifically designed for remote audio recording, electronic field production, electronic news gathering, and location film production.
FP33 features include: High-quality, sealed input potentiometers, Dynamic range of over 100dB 48V phantom, 12V phantom power, and 12V T (A-B) power, LED indicators of input levels, output peaks, limiter action, and low battery. Pop-up pan pots and a link switch to couple inputs 2&3 into a stereo pair, Mix Bus to connect an additional FP33 or FP32A, comprehensive headphone monitoring control including headphone MS stereo matrix, internal DIP switches for over 4,000 customized setups. The FP33 has an exceptionally low self-noise and a wide dynamic range that are perfect for use with DAT and other digital recording media.
Exceptionally quiet design, suitable for use with DAT and other digital formats
Extended frequency response of 20 Hz–20 kHz
Dynamic range greater than 100 dB
Transformer balanced inputs and outputs for superior rejection of RFI and electromagnetic hum
Three selectable mic/line inputs
Two selectable mic/line outputs
Wide range input gain controls handle hot signal levels without attenuators
48 V phantom, 12 V phantom, and 12 V T (A-B) microphone power
Pop-up pan pots
Link switch gangs inputs 2 and 3 to control a stereo microphone
Switchable low-cut filters on each input
Bi-color LED signal presence and peak indicator for each input
Professional VU meters with selectable timed or toggled backlighting
Dual clutched Master gain control for simultaneous or separate adjustment of output levels
Bi-color LED limiter and peak indicator for each output
Two linkable output peak limiters with adjustable thresholds and release times
Slate microphone and slate tone with selectable functions
Isolated two-way talk-back using Monitor In and modified Slate Mic/Tape Out jack
High tolerance 3.5 mm jacks for stereo Tape Out and Monitor In
1 kHz tone oscillator
Mix bus jack and cable to link FP33 or FP32A mixers
Headphone monitor mode switch to select L, L+R (Mono), R, or Stereo
Internal headphone level adjustments to balance post–master audio levels and Monitor In levels at the headphone output
Selectable M/S decoding circuit for headphone monitor.
Mixer/Monitor In switch (locking and momentary)
Internal Monitor defeat switch for split-feed headphone operation
Headphone volume control
1/4 in. and 3.5 mm jacks for stereo headphone outputs.
Customized operation via internal DIP switches, trim pots, slide switches, and optional jumpers
Regulated voltage rails (±15 Vdc) provide exceptional headroom
Bi-color power On/Off LED
Battery check switch and low battery warning LED
Non-polarized external power jack
External power operating range of 12 to 30 Vdc
Soft-touch, color coded control knobs with raised position indicators
Metal XLR input and output connectors
Rugged, plated metal chassis
Operates for 8 hours on two 9 V alkaline batteries (not included)