Use code WINTER10 to save 10% on all NEW and USED products (some exclusions apply)!

Used

PreSonus

U139473

Presonus FireStudio Project FireWire Interface

1 item left

This Presonus FireStudio Project comes with the Original Box, Manual, FireWire Cable, Power Cable, and a 10-foot 1/8" TRS to XLR-Male Cable. No software is included.

Condition:
This interface is in good condition with normal wear, has been fully tested, and works great. Please see pictures for details on item condition - only what is pictured is included.

We recommend checking with the manufacturer for the latest operating system and hardware compatibility before purchasing this item.

Product Details:
Quality mic preamps
The FireStudio Project starts with eight custom-designed high-voltage, discrete, XMAX Class A microphone preamplifiers. The job of a microphone preamplifier is to boost microphone level signals to line level so that the signal can be converted from analog to digital. This mic to line boost is generally a preamplification of over 400 times the voltage of the original mic level signal. This preamplification stage is one of the most important stages that the signal will go through before converted to digital, and is why a high performance preamplifier is important to achieving great results.

Advanced platform technology: DICE II and JetPLL
The FireStudio Project is loaded with the new ultra powerful DICE II FireWire chipset delivering 26 channels of simultaneous inputs and outputs at professional-quality 24-bit. The strength of the DICE II chip lies with its ability to easilly handle high channel count at high bit-rate while minimizing latency and load on your computer.

Low jitter, high conversion performance
The synchronization of the FireStudio Project is handled by patented JetPLLTM jitter reduction technology. JetPLL incorporates noise shaping to virtually remove all audio band jitter. JetPLL ensures the highest converter performance possible, resulting in better stereo separation and clearer more transparent audio. JetPLL delivers ultra-fast locking to any digital format, through a wide range of frequencies and is extremely robust, and tolerant of wide variations in clock frequencies. JetPLL ensures near perfect clock performance when networking audio devices thus creating the most stable and robust synchronization to the computer and all devices synchronization with the FireStudio Project.

Near-zero latency DSP mixing/routing
The FireStudio Project also includes the FireControl mixer/router a 18x10 DSP mixer/router for flexible mixing and direct routing any input to any output including the headphone output, with zero latency. The FireControl software application lives between your FireStudio Project interface and your DAW software enabling the mixing and routing of input streams coming into your FireStudio Studio Project interface and playback stream coming from your DAW software.

The FireControl is capable of creating up to five stereo mixes and then routing to the outputs of your FireStudio Project for headphone mixes and various aux sends. This way everyone in the band and the recording engineer can have a custom mix. Also, the FireStudio Project is loaded with internal flash memory so that all FireControl settings are saved and recalled in the FireStudio Project during power off/on. This allows you to configure your FireStudio as a stand-alone device, without being connected to a computer for uses such as a submixer, A/D and D/A-converter, headphone mixer, format converter, instrument or microphone pre-amplifier!

  • Quality mic preamps
  • Advanced platform technology: DICE II and JetPLL
  • Low jitter, high conversion performance
  • Near-zero latency DSP mixing/routing

This week, we try out the Furman Spring Reverbs!
Can you tell us which studio gear matters?
What we know about the Lewitt Project 1040...
Check out our comparison between Avantone's CLA-10 to Yamaha's NS-10M Studio!

Search