This MOTU 828mk3 Hybrid USB/FireWire Interface comes with the Power Cable (not pictured).
Condition: This item is in good condition with normal wear from use, has been tested, and works great. The back light for the display does not function, but the display is still readable in most lighting situations. Please see pictures for details on item condition.
We recommend checking with the manufacturer for the latest operating system and hardware compatibility before purchasing this item.
Product Details: As a hybrid audio interface, the 828mk3 provides flexible connectivity to any Mac or PC via FireWire or high-speed USB 2.0, with 10 channels of pristine 192kHz analog recording and playback, combined with sixteen channels of ADAT digital I/O and stereo S/PDIF. Expand your system by connecting additional MOTU audio interfaces or the 8pre mic input expander.
Tons of I/O - The 828mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 828mk3 provides 28 separate inputs and 30 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.
On-board digital mixer with effects for monitoring and live mixing - Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer-with no latency and no processor strain on your computer. Apply hardware DSP-driven compression, EQ, and reverb to every input and output, independent of your host computer. When recording from the mic/guitar inputs, the 828mk3's signal overload protection gives you an extra 12dB of headroom above zero with no digital clipping or harsh artifacts.
Advanced audio analysis tools - Analyze and scope your audio with advanced diagnostic tools, including a full-screen realtime FFT display, spectrogram waterfall display, full-featured oscilloscope, X-Y plot, and linear/polar phase analysis graphs.
Standalone operation as a mixer - After programming the on-board mixing in the studio, unplug the 828mk3 from the computer and take it on the road for operation as a Standalone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.
Across-the-board compatibility - The 828mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers.
Hybrid FireWire/USB2 connectivity lets you connect to your computer via either bus-powered FireWire or hi-speed USB2
CueMix FX - flexible 28 input/16 bus mixer with on-board DSP effects, including reverb with sends/returns, plus EQ and compression on every input and output
28 inputs / 30 outputs (at 44.1/48 kHz) - there's no channel sharing in the 828mk3; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels
Front-panel control lets you access any setting in your entire 828mk3 mix directly from the front panel
Standalone operation lets you program your mixes at the studio and then bring the 828mk3 to your gig with no computer needed
Tweak your mix on site using the back-lit LCD and front-panel controls
Multiple CueMix FX mixes - create different monitor mixes for the main outs and headphones, or add send/return loops for outboard gear with no latency
Two front panel combo jacks provide hi-Z 1/4" guitar input or low-Z XLR mic input with phantom power, pad, and plenty of gain
Mic/guitar instrument sends - add your favorite outboard EQ, preamp, reverb or other processor to the two mic/guitar inputs, before the signal goes digital
Clip protection - Mic/guitar input limiter prevents digital clipping and distortion from overloaded signal levels up to +12dB over zero
8 24-bit 192kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks
Precision Digital Trim - Digitally controlled analog trim on all analog inputs (mic/guitar inputs + 1/4" TRS inputs) provides accurate adjustments in 1dB increments
Fine-tune the balance of your analog inputs and then save/recall trim configurations
Flexible optical I/O - 16 channels of ADAT lightpipe, 8 channels of SMUX (96kHz) or two pairs of stereo TOSLink
Mix and match formats between the two banks
Connect a MIDI controller and/or sound module with no separate interface needed
The MIDI I/O is sample-accurate with supporting software
Add additional interfaces for more I/O as your needs grow
Separate XLR main outs and front-panel headphone jacks, each with independent volume control
Stereo 24-bit 96kHz S/PDIF in/out
Word clock in and out
SMPTE in and out
Supports all popular Mac and Windows audio software
100% compatible with all host-based effects processing in today's popular audio programs
Includes AudioDesk full-featured sample-accurate workstation software for the Macintosh with recording, editing, mixing, realtime 32-bit effects processing & sample-accurate sync
Plug-and-play operation with your Mac or PC via FireWire or high-speed USB 2.0
Front panel volume control for monitoring - Stereo, Quad, 6.1, 7.1 and user-defined surround monitoring setups available
Two front-panel headphone jacks with independent volume controls
Front-panel meters or activity LEDs for all analog, digital and MIDI I/O, plus SMPTE sync tach and lock LEDs
Dedicated front-panel clock status LEDs
International 100-240V, 50-60 Hz auto-switching power supply