This used DBX Crossover comes with a 6-foot 1/4" TS Cable and a Power Cable.
Condition: This item is in good condition with normal wear, has been fully tested, and works great. Please see pictures for details on item condition - only what is pictured is included.
Product Details: The 234 is a mono 4-way or stereo 2-way/3-way crossover with controls that exude great precision, and the feel is a solid "click." All the inputs and outputs are TRS balanced 1/4 in. jacks that are bolted down to the chassis. This "nutting down" of the jacks insures that even if someone steps on a cable plugged into the unit, it's not going to tear up the circuit board inside. All DBX crossovers feature Linkwitz-Riley 24 dB per octave filters, the professional standard.
Via 2 switches on the back panel you first select whether you're operating your system in stereo 2-way, 3-way or mono 4-way. Another back panel switch also selects whether or not you want to mono sum the LF (sub woofer) out. (Most systems that use a sub woofer are mono summed to take advantage of amplifier power and because low frequencies are non-directional.) Back panel switches allow you to select the range of the crossover frequencies individually for both channels. The crossover frequency controls have a green LED that indicates the X10 switch on the back panel is activated (we wouldn't make you check the switch position on the back every time you wonder where it's set). All these switches are on the back panel because it could be disastrous if you were to change them mid-program.
On the front panel you'll notice there are LEDs that indicate whether the unit is in mono or stereo mode. Each channel has an input gain control for proper level setting. There's a recessed 40 Hz low cut (HPF) on each channel to remove unwanted low frequencies. Both the low and high outputs on each channel have a gain control ranging from - to +6 dB, to allow muting of individual outputs and for level matching. Also, these outputs each have phase reverse switches that'll help get you out of a bind without having to reconfigure your system. These phase reverse switches may be internally reconfigured as mute switches.